3in1 primer-enamel RasKras

For the simultaneous conversion of rust, anticorrosive primer and finish painting of clean and corroded metal surfaces with a thickness of rust firmly bound to metal up to 60 microns. Primer-enamel can be used as a corrosion-resistant primer for finishing weather-resistant enamels in multilayer coating systems.

Ask a question


Primer enamel is a suspension of anti-corrosion pigments and fillers in a solution of modified alkyd varnish with the addition of organic solvents and target additives.
For the simultaneous conversion of rust, anticorrosive primer and finish painting of clean and corroded metal surfaces with a thickness of rust firmly bound to metal up to 60 microns. Primer-enamel can be used as a corrosion-resistant primer for finishing weather-resistant enamels in multilayer coating systems.
Objects: Building structures, warehouses, hangars, garages, pipes, bridges, gates, doors, awnings, forged furniture, decorative fences, gratings and other products.
It dries quickly. It forms a strong, even semi-gloss coating with high weather and anti-corrosion resistance. The coating is resistant to water and industrial oils. The use of “3 in 1” primer-enamel greatly simplifies surface preparation before staining and reduces the cost of the technology for creating a corrosion-resistant coating, since it does not require the preliminary removal of firmly bound rust and priming. The coating system, consisting of two layers of soil-enamel in a moderately cold climate (MCC1) retains its protective properties for 4 years.

Attention! Material consumption may vary depending on the type and degree preparedness the surface of the selected tool, the application conditions
and
or
and
Primers are usually applied in a single layer,
finish coatings are recommended to be applied in 2 layers

0 KG
Recommend purchasing
material with a margin of 10-20%





Specifications

Basis Alkyd
Colors Gray, dark cherry, cherry, red brown, chocolate, white, blue, black, dark green, yellow, ivory
Drying Complete drying single-layer coating: - at (20±2)ºС - 8 h.; - at (80±2)ºС - 20 min. Complete drying of the two-layer coating applied by the wet on wet method: - at (20±2)ºС – 16 h.; - at (80±2)ºС - 40 min.
Consumption 70-120 g/m2.
Packing 0.9 kg, 1.9 kg, 2.5 kg, 6 kg, 21 kg, 53 kg
Shine Semi matt
Trading group For metal
Trademark RasKras
Back to list