Two-component acrylic-based primer-enamel with the addition of atmospheric and chemically resistant pigments, inert fillers, organic solvents and hardener. It is delivered in a set: base-enamel base, hardener and solvent.
— for professional corrosion protection of metal structures (including steel, cast iron, galvanized);
— for coloring fiberglass products.
Objects: External and internal metal surfaces of urban, railway, road transport, metro rolling stock, agricultural, utility and road-building equipment, technological equipment, bridge structures, power transmission towers, metal parts (frames, bridges, shock absorbers, chassis elements, radiators and other details) of vehicles; shutoff valves for oil and gas pipelines; outer surfaces of containers for storing oil, diesel fuel, industrial oils; hangars, forged metal products.
The coating combines good decorative and operational properties, as well as a long service life in the atmospheric conditions of various climatic zones and indoors. It has exceptional wear resistance and resistance to mechanical stress; good resistance to fresh and seawater, acid, alkaline and other detergent solutions, gasoline, diesel fuel, oil, drilling fluids, industrial oils. No priming required.
Primer-enamel UR-2C IP
Two-component acrylic-based primer-enamel with the addition of atmospheric and chemically resistant pigments, inert fillers, organic solvents and hardener. It is delivered in a set: base-enamel base, hardener and solvent.
Ask a question
Attention! Material consumption may vary depending on the type and degree
preparedness the surface of the selected tool, the application conditions
and
or
and
0 KG
Recommend purchasing
material with a margin of 10-20%
material with a margin of 10-20%
Specifications
Basis | Acrylic |
Colors | Various according to buyer’s request |
Drying | When the thickness of the dry single-layer coat. is 20-25 microns and the drying temperature is 20 °C stops sticking within 1 h. |
Consumption | With the thickness of the dry single-layer coat. 25-30 microns: 45-80 g / m2 |
Packing | 17kg.+2.6 kg. |
Shine | Semi-gloss. Semi-matte. Matt |
Trading group | For metal |
Trademark | HardMax |
finish coatings are recommended to be applied in 2 layers