Primer enamel is a suspension of anti-corrosion pigments and fillers in a solution of modified alkyd varnish with the addition of organic solvents and target additives.
For the simultaneous conversion of rust, anticorrosion primer and finish painting of clean and corroded metal surfaces with a thickness of rust firmly bonded to metal up to 100 microns. Primer-enamel can be used as a corrosion-resistant primer for finishing weather-resistant enamels in multilayer coating systems.
Objects: Building structures, industrial equipment, warehouses, hangars, garages, pipes, gates, doors, awnings, forged furniture, decorative fencing, grilles and other products.
Enamel primer “CORROED” Mr.HardMax
For the simultaneous conversion of rust, anticorrosion primer and finish painting of clean and corroded metal surfaces with a thickness of rust firmly bonded to metal up to 100 microns. Primer-enamel can be used as a corrosion-resistant primer for finishing weather-resistant enamels in multilayer coating systems.
Ask a question
Attention! Material consumption may vary depending on the type and degree
preparedness the surface of the selected tool, the application conditions
and
or
and
0 KG
Recommend purchasing
material with a margin of 10-20%
material with a margin of 10-20%
Specifications
Basis | Alkyd |
Colors | White, signal white, body grey, light grey, yellow, ivory, gray dust, window grey, water blue, signal yellow, signal gray, dark green, cyan, blue, green, signal red, red, cherry, red-brown, black, Golden brown, chocolate, dark cherry |
Drying | Complete drying single-layer coating: - at (20±2)ºС - 6 h.; - at (80±2)ºС - 20 min. Complete drying of the two-layer coating applied by the wet on wet method: - at (20±2)ºС - 12 h.; - at (80±2)ºС - 40 min. |
Consumption | 70-120 g/m2. |
Packing | 0.9 kg, 1.9 kg, 5 kg, 21 kg, 53 kg |
Shine | Semi matt |
Trading group | For metal |
Trademark | Mister HardMax |
Documents
ТО Корроед
Size:
142.3 KB
Декларация о соответствии
Size:
1.1 MB
ПБ Корроед
Size:
119.7 KB
СГР Корроед
Size:
186 KB
finish coatings are recommended to be applied in 2 layers