It is a water solution of a chlorine-containing compound with the addition of a stabilizer, activator and special additives.
The product is intended for gentle surface clarification of wood darkened as a result of mushroom stains, exposure to atmospheric factors, solar UV radiation, as well as the removal of surface biodefeat of various nature. The product is used on planed, sawn and chopped wooden surfaces that have not previously been treated with paints, indoors and outdoors. The tool is not used to remove blueness in the thickness of wood. It is allowed to use the product on concrete, tile, stone, tile, brick and other materials to remove mold, moss, algae and lichens.
Gently bleaches wood due to a mild oxidizing agent. Effectively removes surface biodefeats. Visibly improves the appearance of affected wood. Does not destroy the structure of wood, does not damage the surface.
Wood bleach BOR
The product is intended for gentle surface clarification of wood darkened as a result of mushroom stains, exposure to atmospheric factors, solar UV radiation, as well as the removal of surface biodefeat of various nature. The product is used on planed, sawn and chopped wooden surfaces that have not previously been treated with paints, indoors and outdoors. The tool is not used to remove blueness in the thickness of wood. It is allowed to use the product on concrete, tile, stone, tile, brick and other materials to remove mold, moss, algae and lichens.
Ask a question
Attention! Material consumption may vary depending on the type and degree
preparedness the surface of the selected tool, the application conditions
and
or
and
0 KG
Recommend purchasing
material with a margin of 10-20%
material with a margin of 10-20%
Specifications
| Basis | Chlorine |
| Colors | Colorless |
| Drying | Wood bleaching time for 1-12 hours, depending on the degree of wood damage, ambient temperature etc. |
| Consumption | 100 - 200 g/m2 for one layer. |
| Packing | 5 kg, 10 kg |
| Shine | Matt |
| Trading group | Wood protection |
| Trademark | BOR |
finish coatings are recommended to be applied in 2 layers