Two-component enamel based on acrylic resins with the addition of atmospheric and chemically resistant pigments, inert fillers, organic solvents and hardener. Comes complete: enamel base, hardener and solvent.
— for painting metal surfaces primed with recommended primers (including steel, cast iron, aluminum, galvanized), used in various climatic zones, exposed to aggressive liquid and gaseous media;
— for fiberglass coating;
— allowed for wooden surfaces.
The coating combines good decorative and operational properties, as well as a long service life in the atmospheric conditions of various climatic zones and indoors. It has exceptional wear resistance and resistance to mechanical stress, resistance to fresh and seawater, acid, alkaline and other washing solutions, gasoline, diesel fuel, industrial oils, oil and oil products.
Objects: City and rail transport, subway rolling stock, agricultural, municipal and road-building equipment, technological equipment, bridge structures, external surfaces of oil and oil products storage tanks, cell towers, metal structures for various purposes, high-quality kitchen furniture.
Enamel UR-2C IP
Two-component enamel based on acrylic resins with the addition of atmospheric and chemically resistant pigments, inert fillers, organic solvents and hardener. Comes complete: enamel base, hardener and solvent.
Ask a question
Attention! Material consumption may vary depending on the type and degree
preparedness the surface of the selected tool, the application conditions
and
or
and
0 KG
Recommend purchasing
material with a margin of 10-20%
material with a margin of 10-20%
Specifications
Basis | Acrylic |
Colors | Various according to buyer’s request |
Drying | With a dry single-layer coat. 20-25 microns thick and a drying temperature 20 ° C stops sticking within 40 minutes. |
Consumption | The thickness of the dry single-layer coat. 20-25 microns: 43-75 g/m2 |
Packing | 15kg. + 3.8 kg. |
Shine | High glossy. Semi matt. Matt. |
Trading group | Universal enamels |
Trademark | HardMax |
finish coatings are recommended to be applied in 2 layers